WRAS approved stainless steel ultraviolet steriliser system, which is manufactured in the UK and is suitable for treating up to 8 litres of water per minute*.

A robust high quality system which has been designed with longevity and energy efficiency in mind, resulting in a lower cost of ownership.

Read more
Availability: In stock
£394.68 Inc. VAT



Brand Aqua Cure
Lamp Power (Watts) 15
Max. Flow 8.0 lpm / 2.11 gpm (US Gallons)
Max. Working Pressure 10.0 bar / 145 psi
Port Size 3/4"
Port Type BSP
Chamber Construction 316L Stainless Steel
Control Box Construction 304 Stainless Steel
Lamp Life 8760 Hours (1 Years Continuous Use)
Consumables / Spares Codes
  • UV Lamp - ACUV15
  • Quartz Sleeve - ACUVQ15
  • Quartz Seal/s - ACUVSK15/30/55/75
  • Quartz Nut (Open) - ACUVQN
  • Ballast / Choke - ACUVB15D
  • Lamp Connector - ACUVLC
  • Control Box - ACUV153DCB
Voltage 220-240 VAC, 50/60 Hz Single Phase
Power Consumption 18 VA
Overall Dimensions METRIC

465mm (l) x 168mm (w) x 95mm (d)


18.31" (l) x 6.61" (w) x 3.75" (d)

Box / Bag Quantity (For Bulk Buy) 1
Approvals & Certifications WRAS Approved

In the trade? Apply for a
trade account for big discounts

Product Description

UV steriliser systems are one of the most effective ways to make drinking water sourced from a private supply, such as a well, spring or borehole, safe to drink.

This high quality system has a host of features, including:

  • WRAS approval
  • 316L stainless steel chamber (polished)
  • 15 watt lamp
  • Max. flow of 8 litres/min
  • 3/4" BSP inlet and outlet
  • Long life / high reliability UV lamp
  • Robust design

Please note that UV steriliser systems only kill bacteria in water and should be used in conjunction with other water treatment systems. They should be incorporated into a system comprising the appropriate water filters to remove particles and to treat the water to make it palatable.

If you require any advice, please don't hesitate to get in touch with our highly trained staff who can advise on the appropriate system to meet your specific requirements.

*UV systems have a stated flow rate based on feedwater transmission of 95%. On single pass applications (including drinking water) where the water clarity is less than stated, or the potential flow rate could exceed the recommended maximum flow rate, the installer should fit a suitable flow regulator.