Commercial Sized Water Softener 23L - Meter Controlled
This 23 litre water softener can be used for a large domestic property for 7+ persons and can be used in commercial applications such as dishwashers, glasswashers, laundry equipment and heating systems with an extremely large capacity of 3750.
Features a digital display and the manufacturer has pre-set the metered salt regeneration for optimal results meaning it is low maintenance with little set up.
Dimensions: 735mm H x 280mm W x 450mm D
Free installation kit. 12 month warranty
Softened water is not suitable for consumption.
|33 ltrs p/min peak 45ltrs p/min
|Max. Water Temp
|35°C / 95°F
|METRIC 735mm (h) x 280mm (w) x 450mm (d) IMPERIAL 28.93"(h) x 11.02" (w) x 17.71" (d)
|Min. Water Temp
|Protect From Freezing
|Min. Working Pressure
|1.5 bar / 22 psi
|Max. Working Pressure
|4.0 bar / 58 psi
|Salt Used (Per Regeration)
|3.5 kg / 7.72 lbs
|Capacity (Per Regeneration)
|3750 litres / 990 US gallons
We recommend you measure your cupboard size before purchase as standard cupboard sizes are usually 600mm x 600mm. All machine functions are taken care of automatically by a sophisticated metered controlled valve set by the manufacturer.
Superior performance is achieved by the more expensive, finer and more efficient resin contained within the high capacity vessel, which results in more softened water for every kilogram of salt used.
All machine functions are taken care of automatically by a sophisticated metered controlled valve.The water softener needs access to an electrical socket which also means no replacement batteries are required.
All of our water softeners come with everything you need to start enjoying softened water immediately, including water softener salt and all installation fittings you would need to install onto a 15mm (most common) size pipe including:
- Hoses and Connectors
- Drain Hose
- Jubilee Clip
- Water Softener Salt
15mm Install kit:
- 2x Compression Tee - 15mm with 3/4" Male Tap
- Non Return Valve
- Compression Ballofix 15mm
- Compression Equal Tee 15mm
Setting the Time & date:
- Set “Hour” by Pressing and Holding CLOCK button for 3 seconds. Use the UP or DOWN button to set hour.
- Press SET button to confirm. Minutes will now flash on display panel.
- Use the UP or DOWN button to set minutes.
- Press SET button to confirm. Days will now flash on display panel.
- Use the UP or DOWN button to set hour.
- Press SET button to confirm.
- Display will automatically reset after 30 seconds.
Set up Completion
- Slowly turn the water on at the inlet valve and check for visual leaks on the unit.
- Manually put approximately 8 inches of fresh clean water into the salt tank.
- Turn on the outlet water valve.
- Ensure that the bypass is left in the closed position.
- Finally fill the brine tank with salt and fit the salt lid.