Measurement & Testing
Test kit to determine the total carbonate hardness in a water supply, which is useful in a variety of circumstances such as installing a new Claris or Claris Ultra filter system, or installing or preparing to purchase a water softener.
Use to obtain a baseline measurement of hardness, which is essential information when setting up any new system designed to deal with water hardness.
Pack of 50 total alkalinity and pH test strips, which utilise a single test strip designed with two separate test pads: one for measuring total alkalinity and one for measuring pH. Ideal alternative to traditional wet chemical tests that sometimes require the use of potentially hazardous chemicals.
- Total alkalinity test range: 0, 80, 120, 180, 240, 360ppm (mg/L)
- pH test range: 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0
The Claris Flow Meter is essential if you wish to accurately determine filter cartridge replacement intervals.
Once programed, the Claris Flow Meter continuosly monitors the volume of water going through a filter and displays the remaining filtration capacity in litres.
Features a 3/8" BSP female nut inlet and 3/8" BSP outlet and designed for use with Claris and Claris Ultra filter systems.
Industrial inline TDS (total dissolved solids) monitor with 1/4" pushfit connections and dual probes for measuring both the feed water coming in to a system and the purified water going out. Designed for commercial / industrial applications.
- Range: 0-9990 ppm.
- Resolution: 0-999 - 1ppm, 1000-9990 - 10ppm (indicated by a 'x10 icon').
- Accuracy: +/- 2%