Grease Guardian
Automatic Grease Traps

The Grease Guardian under sink X Range of automatic grease trap and removal units trap food waste and grease and remove grease with a skimming programme.

All units have inbuilt FOG (fats, oils and grease) treatment, FOG removal and self cleaning mechanisms.

Available in 3 variants depending on your requirements.

Read more

Three-stage Operation System

STAGE 1: Solids Collection

Wastewater from the kitchen is directed through the inlet of the Grease Guardian® where a removable strainer basket collects any solid debris.

STAGE 2: Grease & Oil Separation

Grease in the wastewater floats to the surface and is trapped while the clear water leaves the unit and enters the drainage system.

STAGE 3: Self Cleaning & Grease Removal

The timer-driven heating element is activated to liquefy grease, which is then removed by the skimming wheel and deposited into a portable container for recycling. Can be connected to: pot wash sinks, pre-rinse sinks, combi ovens, Chinese cookers and floor drains.

Under Sink Installation

  • Automatically separates & removes FOG (fats oils and grease), from kitchen waste water
  • Solids filtration as standard
  • Reduces pump out requirements
  • Easy to install & maintain
  • Collected waste can be recycled
  • Automatic controls
  • Approved under PDI and ASME
Grease Guardian Automatic Grease Trap
Grease Guardian Automatic Grease Trap

Products

Data Sheets

Name Length Height Inlet/Outlet Width Inlet Height Outlet Height Max Flow
Grease Guardian Automatic Grease Trap

X15 Grease Guardian

Code: X15

Length
788
Height
341
Inlet/Outlet
50
Width
559
Inlet Height
214
Outlet Height
85
Max Flow
0.94 l/sec
788 341 50 559 214 85 0.94 l/sec Enquire Now
Grease Guardian Automatic Grease Trap

X25 Grease Guardian

Code: X25

Length
826
Height
421
Inlet/Outlet
50
Width
559
Inlet Height
294
Outlet Height
160
Max Flow
1.58 l/sec
826 421 50 559 294 160 1.58 l/sec Enquire Now
Grease Guardian Automatic Grease Trap

X35 Grease Guardian

Code: X35

Length
1039
Height
421
Inlet/Outlet
80
Width
610
Inlet Height
282
Outlet Height
187
Max Flow
2.21 l/sec
1039 421 80 610 282 187 2.21 l/sec Enquire Now

All dimensions in mm

Specification: Automatic grease trap with inbuilt FOG treatment, FOG removal and self cleaning mechanisms. 16 Gauge 304 Stainless Steel with bright finish, 25 Watt, 230VAC; 50Hz Motor. 600 Watt Heater with Thermal Cut Out included. Logic Controller with Backlit Display. Skimming Drum is nominally capable of skimming 5 l per hour. Can be connected to pot wash sinks, pre-rinse sinks, combi ovens, Chinese cookers, floor drains and most grease producing kitchen appliances. UL, PDl, CSA, and ASME tested. Please note dimensions are subject to change without notice.

Get in touch today

Which Grease Guardian automatic grease removal system you require will depend on a number of factors which need to be accessed with a site survey, so complete the simple form on the right and our expert team will be in touch to discuss your grease trap system requirements and to arrange your FREE site survey.

Which Grease Guardian automatic grease removal system you require will depend on a number of factors which need to be accessed with a site survey, so complete the simple enquiry form below and and our expert team will be in touch to discuss your grease trap system requirements and to arrange your FREE site survey.

Prefer to call?

Call today to discuss your grease management requirements with a member of our expert team and arrange your FREE site survey.

Call 01704 516916

Grease Guardian Enquiry

Book Your Free Site Survey

Do you use or install other food service equipment? Select all that apply *
Sending